WiFi-Pumpkin is a very complete framework for auditing Wi-Fi security. The main feature is the ability to create a fake AP and make Man In The Middle attack, but the list of features is quite broad.
A man-in-the-middle attack places you between your target and the internet, pretending to be a Wi-Fi network while secretly inspecting every packet that flows through the connection. The WiFi-Pumpkin is a rogue AP framework to easily create these fake networks, all while forwarding legitimate traffic to and from the unsuspecting target. Today, we'll learn to set up this framework on a low-cost Raspberry Pi running Kali Linux .
Download App :- Tech Gyan Mantra
Man - in -the -Middle Pumpkin Pie
On the Raspberry Pi 3 running Kali Rolling, some Kali Linux tools can be broken out into standalone, almost disposable devices. One perfect example is the WiFi-Pumpkin , an attack framework for creating rogue access points to stage man-in-the-middle (MITM) attacks. This allows an attacker to lure victims to their evil access point and begin monitoring internet traffic, effectively seizing control over the flow of data to any connected victims.
A rouge device for creating fake Wi-Fi hotspots from a Raspberry Pi.
When to Use the WiFi Pumpkin
The WiFi-Pumpkin is a great tool to use when you have the ability to bridge an existing Ethernet or Wi-Fi connection, serving internet access to anyone willing to connect to an open network without asking too many questions. It comes stuffed with features, including rogue Wi-Fi access points, deauth attacks on client APs, a probe request and credentials monitor, transparent proxy, Windows update attack, phishing manager, ARP Poisoning, DNS Spoofing, Pumpkin-Proxy, and image capture on the fly.
Following up from a previous tutorial, wireless probe frames can reveal networks a phone or laptop is probing for. One way we can use the WiFi-Pumpkin is to monitor probe frames and create a network in response. We can use the WiFi-Pumpkin to conduct a "Karma" attack and create a network with the same SSID that the target device is expecting, or has connected to before.
The name of your network will have a huge effect on how people interact with it. If you are in a crowd, creating a network with names like "Starbucks" can cause a startling number of devices to connect to you in under a minute. Be creative in how you trick users into connecting to your evil AP. When you want fine control over the various elements of a man-in-the-middle attack, the WiFi-Pumpkin's easy GUI is straightforward enough for most beginners to grasp.
What You ' ll Need to Get Started
The setup to create a WiFi-Pumpkin is minimal and requires only a few components. To put this together, you'll need the following.
- wireless network adapter
- Ethernet cable
- Raspberry Pi
- microSD card
- power source
- USB keyboard/mouse interface
- SD card adapter
- laptop to load files on the SD card
This great kit from Canakit also has most of what you need.
Installing & Running WiFi -Pumpkin ( Kali Linux )
As before any new install, ensure that your system is fully updated. WiFi-Pumpkin will require that you have an up-to-date Python installed on your machine.
sudo apt-get update
WiFi-Pumpkin has a number of dependencies you will need to have installed before it can run smoothly. Install the following if you don't already have them on your Kali-Pi.
STEP 1 : Install Dependencies
Python's package manager, Pip, will help us manage the rest of the installation. To install it on Kali Linux, run the following commands.
sudo apt-get install -y python-pip
The next three dependencies will allow WiFi-Pumpkin to verify certificates, add HTTP layer support, and intercept and inspect traffic flows. Install each as shown below.
pip install service_identity
pip install scapy_http
sudo apt-get install mitmproxy
STEP 2 : Install WiFi -Pumpkin
Download WiFi-Pumpkin by cloning the GitHub repository:
Then go inside the folder:
cd WiFi-Pumpkin
And change the permission of the installer file:
chmod +x installer.sh
And then run the installer by entering the following.
./installer.sh --install
STEP:- 3 Run WiFi - Pumpkin
When it's complete, run WiFi-Pumpkin by simply entering the following.
Sudo wifi-pumpkin
You're ready to get started creating fake APs!
Some Considerations with the WiFi - Pumpkin
Keep in mind, in order for WiFi-Pumpkin to work, you will need to have access to at least one Kali Linux compatible wireless adapter with AP/Monitor mode support. You will need your Pi to be connected to the internet while also capable of monitoring wireless traffic around you.
You can achieve this by using one wireless network adapter and your Pi's internal Wi-Fi card in tandem or a wired Ethernet connection and one wireless network adapter. In the case your particular Pi isn't Wi-Fi capable, you'll need two wireless network adapters. If you are unsure if the wireless adapter you have supports AP/Monitor mode, you can check in terminal with iw list . If there is an "AP" in the list of "Supported interface modes," then your device supports it.
If you're in need of a Kali Linux compatible wireless adapter with the appropriate functionality, check out link And, of course, happy hacking!
For Hacking course :-
Whatsapp :- +16366780163
No comments:
Post a Comment
Note: only a member of this blog may post a comment.